TRUCK MOUNTED AERIAL LIFT

M 43/13

 

 

 

 

GENERAL SPECIFICATIONS
Working height * 42.7 ft 13.0 m
Height to bottom of platform * 37.2 ft 11.3 m
Horizontal reach 17.0 ft 5.2 m
Stowed travel height * 9.6 ft 2.9 m
Weight of lift and trailer 2180 lb 980 Kg
Standard platform capacity 300 lb 36 Kg 
Lower boom articulation 0 -5° to 78°
Upper boom articulation 0  -78° to 65°
Full A-frame outriggers maximum extension 9.6 ft 2.9 m
Rotation 0 360° continuous
Emergency system 0 hand  pump
Honda engine with electric starter drives pump 0 0
* Based on 36" in (914 mm) chassis frame height 0 0
STANDARD FEATURES

HYDRAULIC SYSTEM

Working pressure 2360 psi        (165 bar)
Hydraulic pump flow 2 GPM (7.6 lts/min)

CONTROLS

Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
|Hydraulic controls at platform and pedestal
Hydraulic tool power at platform
Engine start/stop at base and platform
Air line at platform

SAFETY

Holding valves: Safety valves included in hydraulic cylinders locks. The system in case of hose damage or any hydraulic system failure.  
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)

MECHANICAL SYSTEM

Platform leveling is fully automatic by aircraft cable and chain parallelogram system
Aerial device rotation is achieved by a pinion gear mechanism.. 
With the help of a hydraulic swivel joint, rotation is continuous.

OPTIONS

M 43/13 USALIFT can be mounted on trailers or trucks
Pedestal spacers
Bucket cover
Emergency operating system - 12VDC
Articulated outriggers (maximum extension: 12.8 ft - 3.90 m)
RECOMMENDED VEHICLE SPECIFICATIONS

STANDARD OUTRIGGERS

GVW 11660 lbs (5250 Kg)
Load Capacity 6600 lbs (3000 Kg)
Wheelbase 13.0 ft (4 .00 m)

ARTICULATED OUTRIGGERS

GVW 8600 lbs (3900 Kg)
Load Capacity 2200 lbs (1000 Kg)
Wheelbase 9.5 ft (2.90 m)
USA-LIFT Aerial Device meet or exceed all applicable ANSI Standards as of the date of manufacture
USA-LIFT reserves  the right to improve  models and change specifications without notice or obligation

 

 

 

 

 

 

 

TRAILER MOUNTED AERIAL LIFT

 

 

GENERAL SPECIFICATIONS

T 43/13 T 36/11 T34/10
Working height 41.8 ft 35.8 ft 33.9 ft
Height to bottom of platform 36.4 ft 30.4 ft 28.5 ft
Horizontal reach 18.3 ft 16.0 ft 15.4 ft
Stowed travel height 8.8 ft 8.2 ft 8.2 ft
Weight of lift and trailer 3590 lb 3500 lb 3460 lb
Standard platform capacity 0 300 lb 0
Lower boom articulation 0 -5° to 81° 0
Upper boom articulation 0  -81° to 65° 0
Outriggers maximum extension 0 12.9 ft 0
Rotation 0 360° continuous 0
Emergency system 0 manual pump 0
Honda engine with electric starter drives pump 0 5.5 hp 0

STANDARD FEATURES

HYDRAULIC SYSTEM

Working pressure 2360 psi        165 bar
Hydraulic pump flow 2 GPM 7.6 lts/min

CONTROLS

Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
|Hydraulic controls at platform and base
Hydraulic tool power at platform
Engine start/stop at base and platform
Air line at platform

SAFETY

Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.  
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)

MECHANICAL SYSTEM

Platform leveling is fully automatic by aircraft cable and chain parallelogram system
Aerial device rotation is achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. 
With the help of a hydraulic swivel joint, rotation is continuous

OPTIONS

Bucket cover
Emergency operating system - 12 VDC
Electric insulation. These lifts are tested in accordance with ANSI A92.2, 1990, for a "46-Kv and below" Category C rating
USA-LIFT Aerial Device meet or exceed all applicable ANSI Standards as of the date of manufacture
USA-LIFT reserves  the right to improve  models and change specifications without notice or obligation
Code 10.30.0001

 

 

ARTICULATING BOOM AERIAL DEVICE

MODEL M 34/10   

     

 

 

 

GENERAL SPECIFICATIONS

Working height * 33.9 ft 10.3 m
Height to bottom of platform * 28.5 ft 8.7 m
Horizontal reach 15.4 ft 4.7 m
Stowed travel height * 8.2 ft 2.5 m
Standard platform capacity 300 lb 136 kg
Weight of lift and trailer 1740 lb 790 kg
Lower boom articulation 0 -5° to 81°
Upper boom articulation 0  -81° to 65°
Full A-frame outriggers maximum extension 9.5 ft 2.9 m
Rotation 0 360° continuous
Emergency system 0 manual pump
Honda engine with electric starter drives pump 0 5.5 hp
* Based on 27.5 in (700 mm) chassis frame height 0 0

STANDARD FEATURES

HYDRAULIC SYSTEM

Working pressure 2360 psi        165 bar
Hydraulic pump flow 2 GPM 7.6 lts/min

CONTROLS

Full feathering hydraulic controls provides metering characteristics which enable the operator to slowly start and stop aerial functions.
|Hydraulic controls at platform and base
Hydraulic tool power at platform
Engine start/stop at base and platform
Air line at platform

SAFETY

Holding valves: Safety valves included in hydraulic cylinders locks the system in case of hose damage or any hydraulic system failure.  
Hydraulic hoses and platform leveling system installed inside boom for protection (according to ANSI A92.2-1990)

MECHANICAL SYSTEM

Platform leveling is fully automatic by aircraft cable and chain parallelogram system
Aerial device rotation is achieved by a pinion gear mechanism. The gear box has heavy duty steel worm and ring gears enclosed in an oil bath. 
With the help of a hydraulic swivel joint, rotation is continuous

OPTIONS

M 34/10 USALIFT can be mounted on trailers or trucks
Bucket cover
Emergency operating system - 12VDC
Articulated outriggers (maximum extension: 12.8 ft - 3.90 m)

RECOMMENDED VEHICLE SPECIFICATIONS

STANDARD OUTRIGGERS

GVW 11660 lbs 5250 Kg
Load Capacity 6600 lbs 3000 Kg
Wheelbase 13.0 ft 4 .00 m

ARTICULATED OUTRIGGERS

GVW 8600 lbs 3900 Kg
Load Capacity 2200 lbs 1000 Kg
Wheelbase 9.5 ft 2.9 m
USA-LIFT Aerial Device meet or exceed all applicable ANSI Standards as of the date of manufacture
USA-LIFT reserves  the right to improve  models and change specifications without notice or obligation
Code 10.30.0001

 

 

 

EASY ACCESS TO PARKING LOT LIGHTS

Perfect for sign work                           

  1 YEAR FULL WARRANTY

 WITH USA - LIFT TREE TRIMMING IS AN EASY JOB

 

 

 

 

EXCELLENT FOR DIFFICULT AREAS

IDEAL FOR PRESSURE WASHER AND PAINT JOBS

 

REACH DIAGRAM

  

FAST AND AFFORDABLE TRANSPORTATION

 


 

 

PLATFORM SAFETY CONTROLS QUICK CONNECTIONS FOR AIR WATER AND HYDRAULIC TOOLS

MOUNTED BRACKETS ON ALUMINUM PLATE

INSTALLATION ON FORD F 250/350 OR SIMILAR MINIMUM 8' RED

HEAVY DUTY U  BOLTS

QUICK OUTRIGGERS SET-UP